VOLUMETRIC/METERING DOSERS WITH ELECTRONIC DOSE VOLUME DETECTION
Pneumatic volumetric dosers for precision impulsive doses, integrated with TM PATENTED innovative dose volume control, which will verify dose conformity before dosing.
Complete with automatic purge system in case of KO doses.
Suitable to dose greases, oils, pastes and silicone-based fluids low-to-high viscosities.
Dosing range from 0,01 to 0,5 cc according to selected model.
Dose manually adjustable through graduated knob.
Materials: anodized aluminum, brass, steel, synthetic materials.
Inlet fluid pressure max 15bar.
LOW PRESSURE VOLUMETRIC/METERING DOSERS WITH DIVORCED TECHNOLOGY
Pneumatic volumetric dosers for precision impulsive doses.
Suitable to dose greases, oils, pastes and silicone-based fluids low-to-high viscosities.
Dosing range from 0,003 to 0,75cc according to selected model.
Dose manually adjustable through graduated knob.
Materials : aluminum, brass.
Divorced technology for longer durability in presence of heavy duty applications, extremely high viscosities or aggressive/abrasive fluids.
DOSING SYSTEMS FOR ANAEROBIC OR CYANOACRYLATE ADHESIVES
Table-top dosing systems and equipments for fluid application, manually activated or semi-automatic.
Suitable for dispensing applications of adhesives, specifically anaerobic or cyanoacrylate or low to medium viscosity resins. The adhesive bottle is directly inserted inside the tank, without pouring.
Cycle is managed through its control unit, that can interact with external PLC for enabling or post-cycle signals and alarms.
These systems can be completed with holding structure with touch-n-dose for quick action, rotospray, fixtures, heated tanks or dose control solutions to guarantee the process.
DISPENSING VALVES FOR MEDIUM-HIGH VISCOSITY FLUIDS
Pneumatic dispensing valves, on-off, non volumetric, for continuous or impulsive doses.
Suitable for dosing or dispensing of greases, oils, pastes, silicones or resins.
Possible dosing range from microdoses up to continuous dispensing as in filling or liquid seal applications.
Suitable for direct feeding from tank or pump or integrated with volumetric dosers for precision filling or precision liquid sealing. Manual output flow adjustment through knob.
Aluminum body.
LOW PRESSURE VOLUMETRIC/METERING DOSERS
Pneumatic volumetric dosers for precision impulsive doses.
Suitable to dose greases, oils, pastes and silicone-based fluids low-to-high viscosities.
Dosing range from 0,003 to 0,75cc according to selected model.
Dose manually adjustable through graduated knob.
Materials: aluminum, brass.
Inlet fluid pressure max 15bar.
HIGH PRESSURE VOLUMETRIC/METERING DOSERS
Pneumatic volumetric dosers for precision impulsive doses.
Suitable to dose greases, oils, pastes and silicone-based fluids low-to-high viscosities.
Inlet fluid pressure max 150bar.
Dosing range from 0,03 to 100cc according to selected model.
Mechanical suck-back effect at the end of the dosing cycle to help detaching the tip in presence of gluey fluids.
Dose manually adjustable through graduated knob.
Materials: aluminum, brass.
TABLE-TOP DOSING SYSTEMS
Table-top dosing systems and equipments for fluid application, manually activated or semi-automatic.
Suitable for grease, oil, paste, silicone or resin applications, they can be equipped with a variety of dosing elements according to fluid or process.
Integrated systems, complete with custom tailored fixtures and supplied with full functional tests at TM, where customers can see and learn how to operate their equipment.
HAND-HELD DOSING SYSTEMS
Hand-held dosing systems and equipments for fluid application, manually activated.
Suitable for grease, oil, paste, silicone or resin applications, they can be equipped with a variety of dosing elements according to fluid or process.
Integrated systems, complete with custom tailored elements and supplied with full functional tests at TM, where customers can see and learn how to operate their equipment.
E-MOBILE DOSING SYSTEMS
Mobile dosing unit, wheeled, for manual applications and microdosing of lubricants.
Complete with feeding accumulator tank, rechargeable from an extrusion pump, and with its own control unit for cycle management.
The EMG integrates precision volumetric dosers chosen for the very application and can be completed with custom tailored fixtures, terminals or other appendices that can be interchangeable through quick connectors for a rapid change of use.
MICROSPRAYING SYSTEMS
Microspraying systems predisposed to be integrated onboard automatic presses or lubrication stations. Suitable for low to medium viscosity liquids such as oils, emulsions, water, paints, inks, solvents, etc.
Complete standalone systems with own structure which integrates stainless steel pressure tank and control unit with pneumatic and electric circuits.
Complete spray cycle management with fine tuning per single channel of air and fluid flows.
Possibility to interact with external PLCs to receive start/stop cycle signals. Feeding and management of VMJET spray guns single or in battery to different cover surfaces with a very
fine spray, working at super low pressure to minimize fume dispersions and overspray.
EQUIPPED BENCHES
Special manual or semi-automatic assisted working stations, equipped with dosing systems and turn-key supplied for manual assembly operations where fluid dosing is required.
Completely custom tailored benches manufactured on specifications for dosing and microdosing of lubricant, silicone, resin or adhesive applications during the assembly process.
Can be interfaced with existing production lines or external managements for process control.
TWIN COLUMN ELEVATOR EXTRUSION PUMPS FROM 1 TO 200 LT
Extrusion pumps featuring
twin-column pneumatic elevator.
Suitable to feed dosing systems with greases, pastes, medium-to-high viscosity silicones and resins.
Dashboard includes full frontal controls and indicators.
Size fit for 1-3 liter canisters, 5 to 50 liter pails and 200 liter drums/barrels.
Custom made extrusion disc/plate sized upon packaging.
Optional: minimum level pump stopping device.
2-hand safety controls.
CARTRIDGE EXTRACTORS
Pneumatic cartridge extractor tank.
Suitable to feed dosing systems with silicones, resins, adhesives, pastes or lubricants in cartridge packaging.
Cartridge safety locking system made by TM.
REVOLVING VOLUMETRIC/METERING CONTINUOUS DOSERS
Electric volumetric continuous dosers based on gear-dosing technology.
Suitable to dose greases and silicones, low to high viscosities.
Volumetric dispensing of microdoses, continuous strings/doses or precision filling.
Brushless motor integrated.
Requires dedicated TM electronic drive and/or control unit/panel.
VOLUMETRIC/METERING LINEAR DOSERS
Electric volumetric linear dosers for high precision dosing applications.
Suitable for lubricants, pastes, silicones, one- or two- component resins, gap fillers, thermal greases and fluids from low to high viscosity, also with aggressive chemical or physical properties.
Volumetric dispensing of microdoses, continuous strings or precision filling.
Brushless or stepper motor integrated.
Requires dedicated TM electronic drive and/or control unit/panel.
Possibility of custom-made projects for size, capacity and dosed fluids.
VOLUMETRIC/METERING LINEAR DOSERS FOR TWO-COMPONENT RESINS
Electric volumetric linear dosers for high precision dosing applications of two-component resins.
Suitable for two-component fluids such as resins, silicones, gap fillers, low to high viscosity, also with aggressive chemical or physical properties.
Volumetric dispensing of microdoses, continuous strings or precision filling.
Brushless or stepper motor integrated.
Requires dedicated TM electronic drive and/or control unit/panel.
Possibility of custom-made projects for size, capacity and dosed fluids.
PROCESS CONTROL UNITS
Dosing process control systems.
Devices and accessories which can be integrated or added on TM
impulse or continuous dosing systems/elements.
Suitable for lubricants, resins, silicones, pastes, glues and adhesives.
Technologies of flow detection, dispensing detection and volume detection/control for dose and process validation, against possible air bubbles, dosing/feeding/flow anomalies or nozzle clogging.
SPRAY GUNS
Pneumatic air spray guns, non volumetric, for continuous or impulsive/spot spray applications.
Suitable for low to medium-high viscosity fluids such as oils, glues, silicones, emulsions, water, paints, inks, solvents, greases, pastes, resins, etc. Anti-leak needle closure on the tip and various spray nozzles available.
Flow adjustable mechanically with finely milled ticking knob.
Materials: aluminum and stainless steel. Suitable for straight feeding from pressure tank or paired with volumetric/metering impulsive or continuous dosers for precision spraying and microspraying applications.
NEEDLE DISPENSING VALVES FOR LOW-MEDIUM VISCOSITY FLUIDS
Pneumatic needle valves, non volumetric, for continuous or impulsive/spot fluid applications.
Suitable for low to medium viscosity fluids such as oils, glues, silicones, emulsions, water, paints, inks, solvents, greases, pastes, resins, etc.
Suitable for continuous
dosing/dispensing or filling applications or timed-dosing/microdosing.
Flow adjustable mechanically with finely milled ticking knob.
Material: aluminum.
Suitable for straight feeding from pressure tank/pump or paired with volumetric/metering continuous dosers as remote dispensing head for
precision dosing.
MEMBRANE DISPENSING VALVES
Pneumatic membrane valves, non volumetric, for continuous or impulsive/spot fluid applications.
Suitable for low to medium viscosity fluids such as glues, vinyl, anaerobic, solvent-based adhesives, resins and fluids low to medium viscosity.
Suitable for continuous dosing/dispensing or filling applications or timed-dosing/microdosing.
Flow mechanically adjustable with finely milled ticking knob.
Materials: aluminum and special plastic materials.
DEGASSING MACHINES
Machines for fluid degassing/de-aerating processes.
Suitable for lubricants and damping silicone fluids at low, medium, high or very high viscosity.
TM's patented process with closed fluid circuit, which automatically loads a batch from pump/tank, to reduce the risks of contamination or oxidation of the treated fluid.
Working capacity up to 4 liters per cycle, depending on the model.
Closed discharging and tank/accumulator filling under vacuum conditions to preserve the fluid when the degassing process is finished and the machine fills the detachable accumulators with the treated fluidAutomatic filling process of SB-AUTO accumulator tanks or cartridges.
AXIS ROBOT MACHINES
All 3-axis robot system machines made by TM feature TM's own control logic with maximum flexibility and ease of programmability and
re-programmability, which start from cad-generated files.
Machines can be standalone or interfaced with external managing software to exchange signals. They can be predisposed for barcode readers for program selection or format change.
The machine structure shell is in solid steel, sturdy and suitable for rough working industrial environments.
Standard models range up to 800x1800mm working area, open also to custom size machines for special purposes.
| 1- MOD. GIOTTO 300 | WORKING AREA 300X300MM |
| 2- MOD. GIOTTO 600 | WORKING AREA 600X600MM |
| 3- MOD. GIOTTO 1800 | WORKING AREA 800X1800MM |
DOSING MACHINES ONE-COMPONENT FLUIDS
Dosing systems for one-component fluids.
Suitable for greases, pastes, silicones, resins with medium- to high- viscosities.
Precision dispensing of gap fillers and heat sink pastes.
Fully integrated system which includes an extrusion pump for pails from 5 to 50 liters, inserted within a containment and protection cabin.
On the side is the dosing system control panel with touch screen to manage the dosing head(s), which are usually electric volumetric dosing groups with various technologies available.
Dosing head(s) can be integrated within the machine or remoted on an external automation or robot.
DOSING MACHINES TWO-COMPONENT FLUIDS
Dosing systems for two-component fluids.
Suitable for two-component silicones and resins with medium- to high- viscosities.
Fully integrated system which includes two twin extrusion pumps for pails from 5 to 50 liters, inserted within two containment and protection cabins.
On the side is the dosing system control panel with touch screen to manage the dosing head(s), which are usually two-component electric volumetric dosing groups with various technologies available.
Dosing head(s) can be integrated within the machine or remoted on an external automation or robot.
VACUUM-BASED DOSING MACHINES
Custom machines and technologies for precision filling or encapsulating processes under vacuum conditions, for electronics, cinematics or hydraulics like shock absorbers, hinges or dampers.
The Vacuum Filling family uses TM's patented degassing processes and vacuum injection techniques which are developed custom for each project and component, so the customer is followed personally at every step and the best results are guaranteed.
Possibility to develop standalone units or automated units to be inserted within automated assembly lines.
SPECIAL DOSING MACHINES
Specially developed machines for dosing processes, equipped with dosing systems and supplied turn-key and ready to run.
Totally custom projects on customer's specifications for dosing or microdosing applications of lubricants, pastes, resins, silicones, polyurethane, glues, etc.
Possibility to manage satellite machines or external stations for process traceability.
